Rapid Fire User Manual
4 – Akimbo / Mimic / Changing Modes
6 – Jump Shot / Quick Scope / Auto Aim / Auto Spotting
The RapidFirePS4 Rapid Fire mod offers you the most cutting edge and functional features on the planet. We have managed to pack the mod with a barrage of features. How these features are accessed and modified is the most innovative feature of the programming. In the following texts you will find everything you need to understand and operate the most effective mod on the planet. Always remember that many of these features can be used in conjunction with one another allowing an almost unlimited number of combinations.
Let our PlayStation 4 Rapid Fire help enhance your gaming experience today.
When accessing all the controller features of our PlayStation 4 Rapid Fire Mod you will be using the “LEFT” direction of the dPad and the Touch Pad click. We developed the mod as a Sleeper mod. This means there is no extra button added to your controller.
We have included the ability to add a mod button to allow you even quicker access to all these effective features AND the ability to add up to two remappable buttons which can be programmed as any button you would like.
Use LEFT on the dPad to activate mod functions.
The Touchpad is used to access secondary modes and other functions
An additional Mod Button can be installed in to your controller or mod. It will enable you to not have to use LEFT on the dPad.
Every time you enable or disable a feature, unless stated otherwise, the front LED Indicator will flash GREEN when enabling and RED when disabled.
This manual assumes you are using the default button layout where R2/L2 are used for firing/aiming.
However this controller also supports Flipped layouts for use with rapid fire. With Flipped layouts R1/L1 are used for Firing/Aiming. If you use a flipped layout you must change the trigger configuration to “FLIPPED” in the advanced feature management of the RapidFirePS4 PlayStation 4 Mod.
When the flipped layout is selected features which are turned on by the triggers will also be flipped. Example: with the default layout Akimbo is turned on by holding “L2” and tapping “LEFT”. With the Flipped layout you would hold “L1” and tap “LEFT”
How to Activate Rapid Fire – Double tap “LEFT” on the dPad. For an even quicker activation method simple hold the “R2” and tap “LEFT” on the dPad. If your mod has a “MOD” button installed you can simply double press the “MOD” button or hold the “R2” and tap the “MOD” button.
How to Deactivate Rapid Fire – To turn off rapid fire Double tap “LEFT” on the dPad or use any other of the listed methods to activate.
Double Tap "LEFT"
You will see a GREEN Flash to indicate the Rapid Fire is activated.
Hold Square and tap "LEFT"
How to Activate Burst Fire – HOLD the “SQUARE” button and then TAP “LEFT”. The indication light will stay a solid BLUE to indicate that burst fire is activated.
You can set the rate of fire of the Burst Fire mode by adjusting within the programming mode.
How to Deactivate Burst Fire – HOLD the “SQUARE” button and then TAP “LEFT”.
You will see a BLUE Flash to indicate the Burst Fire is activated.
When activated each trigger will be an independent of one another.
Hold LT and tap "LEFT"
How to Activate Akimbo – To activate Mimic mode hold the “Left Trigger” and tap “LEFT” on the dPad. You may also enable Rapid Fire while Mimic is enabled. LED indicator will remain GREEN when Akimbo is active.
How to Deactivate Akimbo – To Deactivate Mimic mode hold the “LEFT Trigger” and tap “LEFT” on the dPad.
When activated the right trigger will controller both the right trigger and left trigger.
Hold down the Touchpad and Tap R2
How to Activate Mimic – To activate Mimic mode hold down the TouchPad and tap “R2”
How to Deactivate Mimic – To Deactivate Mimic mode hold down the TouchPad and tap “R2”.
If the akimbo is activated and rapid fire is turned ON than the left trigger will also be rapid fire, otherwise it works as normal allowing you to scope automatically when firing.
Hold "LEFT" or "MOD" button for 4 Seconds
The “LEFT” or “MOD” button must be held for 4 Seconds to change modes.
Each on of the 10 modes may be programmed or adjusted and will retain its programming even when power is removed from the controller.
NEXT MODE – To change to the next mode you must HOLD “LEFT” for 4 seconds. You will see the main LED flash AQUA (blue + green), count the number of flashes of the LED.. This is the corresponding number of the mode.
PREVIOUS MODE – To go back to the previous mode HOLD “L1” along with “LEFT”.
Hold Touchpad and LEFT
Many of the modes of this mod have sub modes or secondary functions. These modify or change the parent mode.Each of the different modes that have sub modes will have their explanations in that mode.
How to activate Sub Modes – HOLD the “TOUCHPAD” + “LEFT” on the Dpad, while holding both, tap the corresponding features button to change the Sub-Mode.
For example, to change the Jitter sub mode you would Hold the TouchPad + “LEFT” then tap ”Triangle”, the front panel will flash in ORANGE to indicate which sub mode you are currently in.
Jitter takes advantage of a glitch in most COD and FPS games allowing for faster firing of just about all weapons including shotguns and 3-Round burst weapons.
Hold TRIANGLE and tap LEFT
How to Activate Jitter – To activate the Jitter Mod HOLD the “Triangle” button and tap “LEFT”. Remember you can use the “Mod” button instead of “LEFT”. Jitter has 3 sub modes.
Sub Mode 1:
Sub Mode 2:
Sub Mode 3:
Drop Shot lets you go prone as soon as you pull the right trigger and stands you back up when you release it. There are 4 sub modes for standard and tactical layouts.
Hold "CIRCLE" and tap "LEFT"
How to Activate Drop Shot – Hold “CIRCLE” and tap “LEFT” on the dPad or tap the “MOD” button.
How to Activate Drop Shot (Tactical) – Hold “RIGHT STICK” clicked and tap “LEFT” on the dPad or tap the “MOD” button.
Drop Shot has 4 sub modes and you must always use “CIRCLE” for changing the sub mode.
SUB MODE 1:
DROP / STAND AUTOMATICALLY
SUB MODE 2:
DROP / STAND IF NOT AIMING DOWN SIGHTS
SUB MODE 3:
SUB MODE 4:
DROP ONLY IF NOT AIMING DOWN SIGHTS
With jump shot enabled, you will jump automatically as soon as you fire.
Hold X and tap "LEFT"
How to Activate Jump Shot – Hold “X” and tap “LEFT” on the dPad or tap the “MOD” button.
How to Deactivate Jump Shot – Hold “X” clicked and tap “LEFT” on the dPad or tap the “MOD” button.
SUB MODE 1:
SUB MODE 2:
SLOW Repeatitive Jump
SUB MODE 3:
MEDIUM Repetitive Jump
SUB MODE 4:
FAST Repetitive Jump
With Quick Scope active just hold the “LEFT TRIGGER” and you will scope and fire simultaneously when the exact moment accuracy of being scope kicks in. Fine tune Quick Scope with one of its six sub modes.
Hold TOUCHPAD and Tap "L2"
How to Activate Quick Scope – Hold “Touch Pad” and tap “LEFT TRIGGER”.
How to Deactivate Quick Scope – Hold “TOUCH PAD” clicked and tap “LEFT TRIGGER”.
SUB MODE 1:
Rifles / Snipers
SUB MODE 2:
Rifles / Snipers + Rapid
SUB MODE 3:
Rifles / Snipers + Quickdraw
SUB MODE 4:
Rifles / Snipers + Quick Draw + Rapid
SUB MODE 5:
SUB MODE 6:
Ultra Fast + Rapid
The Auto Aim is a feature for the left trigger. Auto Aim will work both rapid fire on and off.
Hold "TOUCHPAD" and tap "X"
How to Activate Auto Aim – Hold “Touch Pad” and tap “X”.
How to Deactivate Quick Scope – Hold “TOUCH PAD” clicked and tap “X”.
This will publicly mark your opponents for you and your team. Auto Spotting has 2 sub modes. When you are aiming at an opponent, they will be marked with an indicator above their head for you and the entire team. Giving your team a significant advantage.
Hold "R1" and tap "LEFT"
How to Activate Auto Spotting – Hold “R1” and tap “LEFT” on the dPad or press the “MOD” button.
How to Deactivate Auto Spotting – Hold “R1” and tap “LEFT” on the dPad or press the “MOD” button.
SUB MODE 1:
Only When Aiming Down Sights
SUB MODE 2:
With this enabled you will automatically hold your breath (Press the Left Stick) when you look down your sights.
Hold "L3" and tap "LEFT"
How to Activate Auto Sniper – Hold down “LEFT STICK” and tap “LEFT” on the dPad or press the “MOD” button.
How to Deactivate Auto Sniper – Hold down “LEFT STICK” and tap “LEFT” on the dPad or press the “MOD” button.
Pressing the Thumbstick to run is a thing of the past. Make your controllers last longer with this automatic feature. With Auto Run enabled you will always be running in game. Auto Run has 3 sub modes.
Hold "TOUCHPAD" and tap "L3"
How to Activate Auto Run – Hold down “TOUCH PAD” and tap “LEFT STICK”.
How to Deactivate Auto Run – Hold down “TOUCH PAD” and tap “LEFT STICK”.
SUB MODE 1:
SUB MODE 2:
Run Suspended When Prone / Crouch with Circle
SUB MODE 3:
Run Suspended When Prone / Crouch with "RIGHT STICK"
To turn off all features at once simply HOLD the “LEFT STICK”, “RIGHT STICK” and tap “LEFT” on the dPad.
The Indicator LED will flash RED 10 times in succession and all features will be off.
Hold down Left Stick, Right Stick and tap Left on the dPAd or tap the Touch Pad.
This is will turn off ALL features on your CURRENT MODE ONLY
RAPID / BURST PROGRAMMING –
Each rapid fire mode can be programmed to one of 50 different speed settings between 4 and 40 shots per second. You can also set the burst fire for each mode from 2-10 shots per burst.
Enter / Exit Programming Mode
The enter the programming mode you must hold both R1, R2 and L1, L2 for 5 seconds. You will see the LED indicator flash White for 2 seconds. Tap the “TOUCH PAD” to exit programming mode.
Change Rapid Fire Speed
Use “UP” on the dPad to increase the firing rate and “DOWN” to decrease the firing rate. The LED indicator will flash GREEN while increasing and RED while decreasing. If you reach the minimum or maximum the indicator will stop flashing.
Change Burst Fire Speed
Change the number of shots fired by using “RIGHT” on the dPad to increase the number of shots fired when you pull the trigger and “LEFT” to decrease the number of shots fired.
Check Rapid Fire Speed
Tap “TRIANGLE” to check the rapid fire speed. The indicator LED will flash BLUE to give you the first number and flash GREEN to give you the second number. IE: 2 BLUE, 4 GREEN equals 24. SEE SPEED TABLE
Check Burst Fire Setting
Tap “X” to check the burst fire shot quantity. The indicator LED will flash BLUE 2-10 times to indicate the burst fire shot quantity.
Reset Current Mode
To reset the current mode you are editing to factory default simply hold “SQUARE” and “CIRCLE” for 7 seconds. The LED indicator will flash CYAN rapidly 20 times to indicate the reset was complete.
You must be in Programming Mode to Master Reset
Nuke the entire thing and reset it to factory default settings by simply holding both sticks down for 7 seconds. The LED Indicator will flash RED, GREEN, BLUE,RED. Once this completes the chip has been reset and programming mode has been exited. It is advised to then turn off your controller and turn it back on.
Reflex Remapping –
Reflex buttons are additional buttons which can be added to the back of your controller at the time of purchase. Reflex buttons replicate and of the standard controller buttons:
CIrcle, Square, Triangle, X, R1, R2, R3, L1, L2, L3, UP, DOWN, LEFT, RIGHT, Touchpad Click
These buttons are set by default to replicate Circle or X. However they can be changed to any of the above mentioned buttons while in the controllers programming mode.
Once in programming mode just hold on of the reflex buttons and TAP the button you want to assign to it. The indicator LED will flash GREEN 3 times to confirm your change. If you tap the controller button which is already assigned to the reflex button, it will disable the button and the indicator LED will flash RED 3 times. the button will then do nothing when pressed until it assigned as another button.
Reflex buttons can now be made turbo! This is changed by Double tapping the reflex button. There are 5 options indicated by the LED flashing 1-5 times when you double tap the reflex button.
- No Turbo
- Fixed 10sps turbo
- Turbo at the currently set rapid fire speed
- Fixed 15sps turbo
- Fixed 5sps turbo
Competition Mode –
Reflex buttons are legal for most competitions, because of this the RapidFirePS4 also has a competition mode which can be enabled to make your controller competition legal. This option quickly disables all mods and LED notifications. Leaving only the reflex buttons active.
IMPORTANT RAPID FIRE INFORMATION
The rapid fire mod allows you to set the rapid fire speeds up to 50 shots per second but you must be aware that setting the rapid fire to the maximum will NOT work for most games.
All games have limitations on the rates at which weapons can fire.
Our default mode settings are already optimized to the fastest possible speeds for the games / weapons listed in the Mode and Default Speed Chart.
The possibility to change these settings are available for you to experiment with and find settings that best compliment you playing style and to be able to create modes for current and all future games which are not part of the default setup.
ADVANCED FEATURE MANAGEMENT (AFM)
All features have an advanced management option that allows you to disable them. This is especially useful if you find there are features you do not use and do not want the possibility to accidentally activate the feature.
To enter the advanced feature management you must have the controller ON and the rapid fire must be OFF. Hold “CIRCLE + TRIANGLE + SQUARE + X” together at the same time for 7 seconds. After 7 seconds you will see the LED indicator flash PURPLE 10 times very fast. Release all the buttons after the flashing stops.
When you are in AFM you can enable or disable any of the features listed to the right by just tapping the corresponding button. When you tap on of the buttons you will see the LED Indicator flash GREEN or RED.
How to exit AFM – To exit AFM just tap “UP” on the dPad. You will see the LED indicator flash PURPLE 10 times.
This changes the trigger functions from default to flipped layout. The LED will flash ORANGE 1 time for default and 2 times for flipped.
LED Mode has 3 settings. The LED will flash ORANGE when changing LED Modes
- LED Indicator FLASHES when Rapid if ON
- LED Indicator SOLID when Rapid if ON
- NO LED CONFIRMATION
This option changes which button[s] will be used to activate features. There are 3 options Left Only, Both or Mod Button Only. When changing the LED will flash ORANGE 1, 2 or 3 times.
- Only Left activates MOD
- Left and Mod Button Active
- MOD button ONLY Active